We formulated 3M™ Scotch-Weld™ Hot Melt Adhesive 3750 to grab and seal quickly, and meet the demands of high-volume production settings such as packing, woodworking, and assembly. When heated to its specified melting point, this adhesive achieves a low viscosity/ high-flow rate and an aggressive hot tack that bonds to handling strength in seconds to help maintain high-tempo productivity. 3M™ Scotch Weld™ Hot Melt Adhesive 3750 AE provides strong shear strength and low peel strength, which means your packages stay sealed and components stay bonded under most conditions. Its 30 40 second open time, along a 1/8 in (0.32 cm) bead, is sufficient for positioning and adjusting for fit and supports high tempo productivity for packaging, woodworking, and applications that involve fibrous materials. We manufacture 3M™ Scotch Weld™ Hot Melt Adhesive 3750 using 100% solids, thermoplastic resin for use with 3M™ Scotch Weld™ Hot Melt Applicators. As a low volatile organic (VOC) compound, this adhesive produces minimal odour when heated and helps support a comfortable work environment. Hot melt adhesives/hot glue sticks have a relatively hot melting point that ranges between approximately 250 380°F/121 196°C, depending on the formulation, and are applied with hot melt applicators, commonly referred to as hot glue guns. Hot melt glues provide a nearly instant bond between many plastics, paper and wood, but when the bond is reheated, some varieties will soften, allowing the bonded surfaces to be separated. The quick stick nature of hot melt adhesives speeds up operations in packaging and production.